您好,歡迎光臨中科聚峰機械有限公司網站! 主營自動攪拌車,攪拌一體車,自動上料攪拌車等各種規格的產品。

自動上料攪拌車行業持續先行者!

點擊撥打服務熱線:4008791999

您的位置:首頁 - 新聞中心 > 公司新聞 >

攪拌一體車重要部件機架起到有效作用

發布時間:2022-05-09 來源:http://www.unaxis.com.cn/ 瀏覽量:

概述:  攪拌一體車重要部件機架起到有效作用,所以需要對其進行充分的了解,對后期的有效使用打好基礎。下面來講講相關內容吧。   The impo
  攪拌一體車重要部件機架起到有效作用,所以需要對其進行充分的了解,對后期的有效使用打好基礎。下面來講講相關內容吧。
  The important parts of the mixing vehicle frame play an effective role, so it is necessary to fully understand it, to lay a good foundation for the effective use of late. Let's talk about the relevant content.
  攪拌一體車的驅動裝置就是通過機架安裝在攪拌設備封頭上的,機架內應有足夠的空間,以容納聯軸器、軸封裝置等部件,并保證安裝、操作所需的空間。大多數情況下,機架中間還要安裝中間軸承裝置,以改善攪拌軸的支承條件。根據不同工況和不同支撐的要求,一般分為無支點機架、單支點機架和雙支點機架三種。
  The driving device of the mixing vehicle is installed on the mixing equipment head through the frame. There should be enough space in the frame to accommodate the coupling, shaft sealing device and other parts, and ensure the space required for installation and operation. In most cases, intermediate bearing devices should be installed in the middle of the frame to improve the support conditions of the mixing shaft. According to different working conditions and different support requirements, generally divided into non-fulcrum frame, single fulcrum frame and double fulcrum frame three.
  無支點機架:本身無支承點,以減速機輸出的兩個軸承支點作為支撐,適用于軸向力較小或僅受徑向力,攪拌載荷均勻的場合。
  Non-fulcrum frame: it has no supporting point and is supported by two bearing fulcrum outputs of reducer. It is suitable for the occasions where the axial force is small or only receives radial force and the stirring load is uniform.
  單支點機架:機架本身設有一個支承,能承受雙向載荷,軸向載荷可以全部卸到機架支承上,能保證減速機的傳動質量,延長減速機的使用壽命,是應用廣泛的一種機架,適用于均勻負載,中等沖擊的場合。
  Single fulcrum frame: the frame itself is provided with a support, can bear bidirectional load, axial load can be all unloaded to the frame support, can ensure the transmission quality of reducer, prolong the service life of reducer, is a widely used frame, suitable for uniform load, medium impact occasions.
  雙支點機架:機架中間設有兩個獨立支承,適用于重的沖擊載荷及對攪拌密封裝置有較高要求的特殊場合。
  Double fulcrum frame: there are two independent supports in the middle of the frame, which is suitable for heavy impact load and special occasions with high requirements for mixing and sealing device.
  單支點機架或雙支點機架,配用三分式聯軸器,可在不拆除減速機和機架的條件下拆除及更換機械密封。還有一種機架,機架帶有提升裝置,可不拆除電動機、減速機,而是將其整體旋轉,進行機械密封的檢修和更換,可減輕設備維護的工作量。
  A single or double fulcrum frame with a three-part coupling can remove and replace the mechanical seal without removing the reducer and the frame. There is also a frame, the frame with lifting device, can not remove the motor, reducer, but the overall rotation, mechanical seal maintenance and replacement, can reduce the workload of equipment maintenance.
  當然為了更好的進行使用,需要定期對攪拌一體車以及它的部件進行檢查維護工作,包括日常保養的工作內容外,尚需拆檢離合器,檢查和調整制動間隙,如離合器內、外制動帶磨損過甚須更換。此外,還需檢查鋼絲繩,V帶滑動軸承,配水系統和行走輪等;須檢查攪拌葉片和刮板與襯板之間的間隙,上料斗和卸料門的密封及靈活情況。等等。
  Of course, in order to better use, it is necessary to regularly check and maintain the foot car and its parts, including the daily maintenance of the work content, still need to disassemble the clutch, check and adjust the brake clearance, such as the clutch inside and outside the brake belt wear must be replaced. In addition, it is necessary to check the wire rope, v-belt sliding bearing, water distribution system and walking wheel, etc. Check the clearance between the mixing blade and the scraper and the lining, the sealing and flexibility of the hopper and discharge door. And so on,
  攪拌一體車重要部件機架起到有效作用的相關內容便是這樣了,如果您想提高一體車的工作效率就需要多了解有關知識,更多資訊就來網站www.unaxis.com.cn看看吧。
  Mixing integral vehicle important parts of the frame to play an effective role in the relevant content is such, if you want to improve the efficiency of the integral vehicle you need to know more about the knowledge, more information to the website www.unaxis.com.cn see it.

截屏,微信識別二維碼

欧美人与动牲交zooz3d,国产精品国产一区二区三区,国产av一区二区三区日韩,免费大片黄国产在线观看